1. |
Disconnect the negative (-) battery terminal.
|
2. |
After loosening the mounting screws, then remove the tailgate
side trim (A).
(Refer to Body - "Tailgate")
|
3. |
Remove the anti-pinch strip sensor connector.
|
4. |
Remove the anti-pinch strip (A) after removing the clips (5EA).
|
Driver Airbag (DAB) Module and Clock Spring Description
Driver Airbag (DAB) is installed the steering wheel and electrically connected
to SRSCM via the clock spring. It protects the driver by deploying the airbag
when frontal crash occurs. The SRS ...
CVVT & Camshaft Components
1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper ...
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...