Kia Sorento: Power Tailgate Latch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS
| 1. |
Check the power Tailgate module input/output value by using the
GDS. If the operation of power Tailgate module is abnormal, replace
power trunk drive unit.
|
| 2. |
To check the DTC of the power trunk module, select "PTM"
|
| 3. |
Select "Input/output monitoring".
|
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...
See also:
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The
sensor judges and sends signal if moisture occurs to blow out wind for defogging.
The air conditioner control module rece ...
Ignition Coil Specification
Item
Specification
Primary Coil Resistance (Ω)
0.62 ± 10％ [20°C (68°F)]
Secondary Coil Resistance (kΩ)
7.0 ± 15％ [20 ...
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Copyright © www.ksmanual.com 2014-2024