1. |
Disconnect the negative (-) battery terminal.
|
2. |
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer to the Body - "Tailgate")
|
3. |
Remove the tail gate latch assembly (A) after loosening the mounting
bolts.
|
4. |
Loosen the PCU (Power Closing Unit) mounting nuts.
|
5. |
Disconnect the power tailgate latch connector (A) and PCU connector
(B).
|
6. |
Remove the power tailgate latch & PCU assembly (A).
|
Rear combination lamp Removal
1.
Disconnect the negative (-) battery terminal.
[Outside]
2.
Loose the screws (2EA) holding the rear combination lamp then
disconn ...
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the start/stop button cover.
3.
Install the crash pad lower panel. ...
Wave Form
...