Kia Sorento: Inspection
| 1. |
Remove the cowl top cover.
(Refer to the wiper)
|
| 2. |
Disconnect the windshield deicer connector (A) from the wiper
motor linkage.
|
| 3. |
Check for continuity between the terminals of deicer lines.
|
| 4. |
Turn the ignition switch ON and the windshield deicer switch ON,
then measure the voltage between the terminals of harness side deicer
connector.
|
Description
Windshield deicer system prevent windshield wiper from freezing in the
winter season. It consists of deicer in the lower part of windshield, switch
and relay. Body control module receives an ...
Windshield Deicer Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A).
(Refer to Body - "Crash pad")
...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...
Multimedia Jack Removal
Put on gloves to protect your hands.
...
Parking Brake Lever Assembly Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
Copyright В© www.ksmanual.com 2014-2024