1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim and power window switch.
(Refer to Body - "Front door")
|
3. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim and power window switch.
(Refer to Body - "Front door")
|
3. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear door trim.
(Refer to Body - "Rear door")
|
3. |
Remove the rear power window switch module (A).
|
4. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
[IMS]
[General]
|
Component Location
1. Head lamp leveling sensor & unit
2. Head lamp leveling actuator
...
Flex Steering Instruction
Flex Steering is system to choose the three modes power steering depending
on driver preference or driving conditions.
...
Antenna Removal
1.
Remove the rear roof trim.
(Refer to Body - "Roof trim")
2.
Disconnect the power cable (A).
3. ...