Kia Sorento: Power Door Mirror Switch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Door Mirrors / Power Door Mirror Switch Inspection
| 1. |
Remove the front door trim and power door mirror switch module
(A).
(Refer to Body - "Front door")
|
| 2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
|
Power Door Mirror Switch Installation
Driver Door Mirror Switch
1.
Install the driver door module and connectors.
2.
Install the front door trim.
...
Power Door Mirror Actuator Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door module.
(Refer to Body - "Front door")
...
See also:
Rear wheel alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always p ...
Cylinder Head Cover Installation
1.
Install cylinder head cover.
(1)
The hardened liquid gasket sealant located on the upper area
between timing chain cover and cyli ...
Rear Disc Brake Installation
1.
Installation is the reverse of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).
...
Copyright В© www.ksmanual.com 2014-2024