1. |
Remove the front door trim panel.
(Refer to Body - "Front door")
|
2. |
Disconnect the switch connector (A) from wiring.
|
3. |
Check the switch for continuity between the No. 1 and No. 2 terminals.
If the continuity is not as specified, replace the switch.
|
Description
The immobilizer system will disable the vehicle unless the proper ignition
key is used, in addition to the currently available anti-theft systems such
as car alarms, the immobilizer system ai ...
Canister Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
D ...
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...