Kia Sorento: Fuel Filler Door Release Actuator Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Release Actuator Inspection
| 1. |
Remove the fuel filler cover (A) after loosening screws (2EA).
|
| 2. |
Remove the fuel filler door module (A).
|
| 3. |
Remove the rear 3rd seats.
(Refer to Body - "Rear seats")
|
| 4. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
| 5. |
Disconnect the fuel filler door release actuator connector (A).
|
| 6. |
Check for continuity between terminal No. 1 and No. 2. If there
is no continuity, replace the fuel filler door release actuator (A).
|
Component Location
1. Fuel filler door open switch
2. Fuel filler door release actuator
...
Fuel Filler Door Open Switch Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front door")
2.
Disconnect the switch connector (A) from wiring.
...
See also:
Fuses
A vehicle’s electrical system is protected from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel
bolster, the other in the en ...
Specification
Item
Specification
Coil Resistance (Ω)
1.18 ~ 1.31 [20°C(68°F)]
...
Copyright © www.ksmanual.com 2014-2024