Kia Sorento: Air Ventilation Seat Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Removal
| 1. |
Remove the seat back cover (A).
(Refer to Body - "Front seat")
|
| 2. |
Remove the blower fan (A) after removing the screws from the seat
back.
|
| 3. |
Remove the air duct (A) after disengaging the hook.
|
| 4. |
Remove the seat cushion (A).
(Refer to Body - "Front seat")
|
| 5. |
Remove the blower fan (A) after removing the screws and disengaging
hook.
|
| 6. |
Disconnect the connecter and remove the blower (A).
|
Air Ventilation Seat Description
Air ventilation seat
It blows the indoor air through the blower fan installed at the seat cushion
and back lower part, and supplies the air into the seat cushion and the seat
back through ...
Air Ventilation Seat Installation
1.
Install the blower fan.
2.
Install the seat back and cushion.
...
See also:
ICM Relay Box Description
The ICM relay is united with rear wiper relay, rear blower relay, rear
seat warmer relay (LH/RH), two turn unlock relay and tailgate latch relay which
installed inside the lower crash pad.
...
Front Lower Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for bending or breakage.
3.
Check the ...
Wheel Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Copyright В© www.ksmanual.com 2014-2024