Kia Sorento: Air Ventilation Seat Description

Air ventilation seat

It blows the indoor air through the blower fan installed at the seat cushion and back lower part, and supplies the air into the seat cushion and the seat back through the duct.

It sends a indoor air to the seat surface through the air ventilation layer between upper and lower layer.

Seat Back Layers

Seat Cushion Layers

Fan

Seat Heater Inspection

Front seat 1. Operate the seat warmer after connecting the connector, and then check the thermostat by measuring the temperature of seat surface. ...

Air Ventilation Seat Removal

1. Remove the seat back cover (A). (Refer to Body - "Front seat") 2. Remove the blower fan (A) after removing the scr ...

See also:

Fuel Filter Installation
1. Install in the reverse order of removal. ...

Seat Belt Buckle Switch (BS) Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The se ...

Evaporator Temperature Sensor Description
The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...