Kia Sorento: Seat Heater Switch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Seat Electrical / Seat Heater Switch Inspection
Front Seat Heater Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the center fascia panel (A).
(Refer to Body - "Crash pad")
|
| 3. |
Disconnect the connectors and cables (A) from center fascia panel.
|
| 4. |
Remove the driver and assist seat heater switch connector.
|
| 5. |
Check that continuity exists between the terminals after turning
the driver seat heater switch ON.
|
| 6. |
If the switch fails to operate, replace the driver and assist
seat heater switch (A).
|
2nd Seat Heater Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the floor console rear cover (A).
(Refer to Body - "Console")
|
| 3. |
Turn 2nd seat heater switch ON and check that continuity exists
between the terminals.
|
| 4. |
Replace the 2nd seat heater switch.
|
Power Seat Control Switch Installation
1.
Install the power seat control switch after connecting the connector.
...
See also:
Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor
2. Rear wheel speed sensor cable
...
How to use this manual
We want to help you get the greatest possible driving pleasure from your vehicle.
Your Owner’s Manual can assist you in many ways.We strongly recommend that you read
the entire manual. In order to ...
Lift And Support Points
When heavy rear components such as suspension, fuel tank, spare tire, tailgate
and trunk lid are to be removed, place addition ...
Copyright В© www.ksmanual.com 2014-2024