1. |
Disconnect the IMS control switch connector.
|
2. |
With the power IMS control switch in each position, make sure
that continuity exists between the terminals below. If continuity is
not as specified, replace the IMS control switch.
|
Curtain Airbag (CAB) Module Description
Curtain airbags are installed inside the headliner (LH and RH) and protect
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of curtain airbag by us ...
Air Ventilation Seat Removal
1.
Remove the seat back cover (A).
(Refer to Body - "Front seat")
2.
Remove the blower fan (A) after removing the scr ...
Tire Installation
1.
Apply tire soap or lubrication to the top and bottom tire beads.
2.
To fit the bottom bead, position the valve at the 5 o’clock pos ...