1. |
The IPM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
|
2. |
To diagnose the IPM function, select the vehicle model and IPM.
|
3. |
To consult the present input/out value of IPM, "Current DATA".
It provides information of IPM input/output conditions of power supply,
turn signal/brake lamp, headlamp, door locks, outside mirror, wiper,
auto-light and transmitters etc.
|
4. |
To perform functional test on IPM outputs, select "Actuation Test"
|
5. |
To change the "user option" on BCM, select the "User Option" menu
and change the value as below.
|
Output Speed Sensor Signal Waveform
...
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
Fuel Tank Air Filter Installation
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped.
In this case, u ...