Kia Sorento: IPM Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
|
| 3. |
Remove IPM(Intelligent intergrated Platform Module) connector
(A), bolts and nut
|
| 4. |
Remove IPM after removing rear connectors.
|
IPM Function
1.
Wiper & Washer Control
(1)
Front Washer Interlocking Wiper Control
If washer switch (WasherSW) is ON at the status of IG ...
IPM Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...
See also:
Cargo Lamp Installation
1.
Replace the lamp bulb.
2.
Install the cargo lamp assembly after connecting the lamp connector.
...
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Rear Stabilizer Bar Inspection
1.
Check the rear stabilizer bar for deformation.
2.
Check the rear stabilizer link ball joint for damage.
...
Copyright В© www.ksmanual.com 2014-2024