Put on gloves to protect your hands.
|
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console upper tray (A).
(Refer to Body - "Console")
|
3. |
Disconnect the connectors and cables (A) from the floor console
upper tray.
|
4. |
Remove the Multimedia Jack (A) after disengaging the hook.
|
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil installation bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug installation
14.7 ~ 24. ...
Fuel Filler Door Release Actuator Inspection
1.
Remove the fuel filler cover (A) after loosening screws (2EA).
2.
Remove the fuel filler door module (A).
...
IMS Power Seat Control Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...