Kia Sorento: Removal
| 1. |
Remove the head lamp.
(Refer to "Lighting system")
|
| 2. |
Remove the bolts and disconnect the horn connectors, then remove
the high pitch horn (A) and low pitch horn (B).
|
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Horn (Low pitch)
4. Horn (High pitch)
5. Clock spring
...
Installation
1.
Install the horns after connecting the horn connectors.
2.
Install the head lamp.
(Refer to "Lighting system")
...
See also:
Input/Output Specification
Connector Pin Lay Out
IMS input/output pin information
No
Signal Name
I/O
Contents
Remark
A1
-
-
-
...
Oil Pump Component
1. Reaction shaft support assembly
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bush-Housing
7. Reaction shaft
8. Bush- Reaction shaft
9. Sl ...
Cup holder
WARNING - Hot liquids
Do not place uncovered cups with hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver c ...
Copyright В© www.ksmanual.com 2014-2024