1. |
Check IPM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
|
2. |
If diagnosis is required on the multifunction switch, select model
and "IPM".
|
3. |
Select "Current data" and check the input/output condition of
"Multifunction switch".
|
4. |
To perform test on "Multifunction switch" outputs, select "Actuation
test".
|
Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used
to control gear setting signals.
...
Flat tire
The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment.
Pull up the luggage box cover to reach this equipment.
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
(4) S ...
Mirror Replacement
Outside Rear View Mirror Assembly Replacement
•
When prying with a flat-up screwdriver, w ...