Kia Sorento: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
|
| 3. |
Disconnect the light switch connector (A) and the wiper switch
connector (B).
|
| 4. |
Remove the wiper switch (A) by pushing the lock pin (B).
|
| 5. |
Remove the steering wheel.
(Refer to Steering System - "Steering column and shaft")
|
| 6. |
Remove the clock spring.
(Refer to Restraint - "Airbag module")
|
| 7. |
Loosen the screws from the multifunction switch assembly (A).
|
Component
...
Installation
1.
Install the multifunction switch.
2.
Install the clock spring and steering wheel.
3.
Install the steering co ...
See also:
Rear Driveshaft Removal and Installation
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Defroster
CAUTION
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window.
✽ NOTIC ...
Phone
Before using the Bluetooth® Wireless Technology phone features
In order to use Bluetooth® Wireless Technology phone, you must first pair
and connect the Bluetooth® Wireless Technology mobile ...
Copyright © www.ksmanual.com 2014-2024