|
1. |
Remove the following items first.
|
2. |
Remove the front seat belt anchor pertensioner cover pad (A).
|
3. |
Remove the front seat belt anchor pertensioner after pushing the
lock pin with a fiat-tip screwdriver (B).
|
4. |
Using a screwdriver or remover, remove the center pillar lower
trim (A).
|
5. |
After loosening the mounting bolt, then remove the center pillar
upper trim (B).
|
6. |
After loosening the mounting bolt, then remove the front seat
belt upper anchor (A).
|
7. |
After disconnecting the pretensioner connector lock pin, remove
the front seat belt pretensioner connector (A), loosen the mounting
bolts, then remove the front seat belt pretensioner (B).
|
8. |
Install in the reverse order of removal.
|
1. |
Remove the front seat belt upper anchor.
|
2. |
After loosening the mounting bolts, then remove the height adjust
(A).
|
3. |
Install in the reverse order of removal.
|
1. |
Remove the front seat assembly.
|
2. |
Disconnect the front seat belt buckle connector wiring (A).
|
3. |
After loosening the mounting bolt, then remove the front seat
belt buckle (A).
|
4. |
Install in the reverse order of removal.
|
Component Location
1. Rear wiper arm & blade
2. Tailgate glass hole
3. Grommet
4. Rear wiper arm nut
5. Rear wiper motor assembly
6. Head cap
7. Rear wiper motor bolt
...
Storage compartments
These compartments can be used to store small items.
CAUTION
To avoid possible theft, do not leave valuables in the storage compartment.
Always keep the storage compartment covers closed while ...
IMS Control Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door")
...