|
1. |
After loosening the mounting screws, then remove the rear combination
lamp (A).
|
2. |
Disconnect the rear combination lamp connector (A).
|
3. |
Loosen the rear bumper upper mounting clips and screw.
|
4. |
Loosen the rear bumper lower mounting clips.
|
5. |
Loosen the mounting bolts.
|
6. |
Disconnect the rear bumper main connector (A).
|
7. |
After loosening the mounting screws and clip, then remove the
rear mud guard (A).
|
8. |
After loosening the rear bumper side's mounting screw and clip,
then disconnect the side's.
|
9. |
Remove the rear bumper assembly (C).
[LH]
[RH]
|
10. |
Install in the reverse order of removal.
|
Brake Line Inspection
1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake hoses for cracks, damage and fluid leakage.
3 ...
Intake Manifold Components
1. Intake manifold assembly
2. Electronic throttle body
3. Intake manifold stay
4. Intake manifold gasket
...
Front Washer Motor Inspection
Front and Rear Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
&nb ...