Kia Optima Manuals

Kia Sorento: Front Bumper Replacement - Bumper - Body (Interior and Exterior) - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Front Bumper Replacement

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body (Interior and Exterior) / Bumper / Front Bumper Replacement

  
•
Pry the trim off using a plastic trim tool and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Loosen the radiator upper cover mounting bolts and clips.
2.
Loosen the front bumper lower mounting clips.
3.
After loosening the front bumper side's mounting screw, then disconnect the side's.
4.
Disconnect the fog lamp connector (A).
[LH]

[RH]
5.
Remove the front bumper cover (A).
6.
Install in the reverse order of removal.
  
•
Make sure the connector is connected properly.
•
Replace any damaged clips.
Front Bumper Components
1. Front bumper cover 2. Front bumper lower stiffner 3. Front bumper upper stiffner 4. Front bumper side bracket ...

Rear Bumper Components
1. Rear bumper cover 2. Rear bumper lower bracket [RH] 3. Rear bumper lower bracket [LH] 4. Rear bumper side bracket [RH] 5. Rear bumper side bracket [LH] ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Side Airbag (SAB) Module Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Si ...

Ladder Frame Removal
   • Use fender covers to avoid damaging painted surfaces. • ...

Categories


Copyright © www.ksmanual.com 2014-2024