Kia Sorento: Quarter Fixed Glass Removal
•
|
Put on gloves to protect your hands.
|
•
|
Take care not to body surface and other parts.
|
|
1. |
Remove the following parts.
A. |
Second row seat assembly
|
B. |
Third row seat assembly
|
|
2. |
Loosen the quarter fixed glass (A) mounting nut.
Tightening torque :
5.9 ~6.4N.m (0.6~0.65Kgf.m, 4.3~4.7lb-ft)
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
• |
Do not scrape down to the painted surface of the
body; damaged paint will interfere with proper bonding.
|
• |
Remove the rubber dam and fastereners from the
body.
|
• |
Mask off surrounding surfaces before painting.
|
|
|
4. |
Remove the quarter fixed glass.
|
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
...
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
See also:
Room Lamp Inspection
1.
Remove the room lamp assembly then check for continuity between
terminals.
[Sunroof]
[General]
...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be used ...
Rear Seat Belt Replacement
Second Row Seat Belt Replacement
•
When installing the belt, make sure not to damaged the ...