1. |
Remove the sunvisor cover (A).
|
2. |
After loosening the mounting screws, then remove the sunvisor
(B) and retainer (C).
|
3. |
Install in the reverse order of removal.
|
1. |
Remove the covers (A), and remove the screws, then remove the
assist handle (B).
|
2. |
Install in the reverse order of removal.
|
1. |
After loosening the mounting screws, then remove the overhead
console lamp assembly (A).
|
2. |
Disconnect the connectors (A).
|
3. |
Install in the reverse order of removal.
|
1. |
Using a screwdriver or remover, remove the room lamp (A).
|
2. |
Disconnect the connector (B).
|
3. |
Install in the reverse order of removal.
|
1. |
Using a screwdriver or remover, remove the luggage room lamp (A).
|
2. |
Disconnect the connector (B).
|
3. |
Install in the reverse order of removal.
|
1. |
Using a screwdriver (-), push the hook (A), remove the vanity
lamp (B).
|
2. |
Disconnect the connector (A), remove the vanity lamp (B).
|
3. |
Install in the reverse order of removal.
|
|
1. |
Remove the following parts.
|
2. |
Remove the ECM mirror cover (A).
|
3. |
Disconnect the ECM mirror connector (B).
|
4. |
Remove the auto defog sensor cover (A).
|
5. |
Disconnect the auto defog sensor connector (B).
|
6. |
Remove the LDWS & rain sensor cover (A).
|
7. |
Disconnect the Lane Departure Warning System (LDWS) connector
(A) and rain sensor connector (B).
|
8. |
Disconnect the connector (A) and the mounting clips in the front
pillar.
[Driver's]
[Passenger's]
|
9. |
Disconnect the connector (A) and the mounting clips in the rear
pillar.
[LH]
[RH]
|
10. |
Slightly lower the rear side of the roof trim.
|
11. |
Disconnect the roof antenna connectors (A).
|
12. |
Detach the clips, then remove the roof trim assembly (A).
|
13. |
Remove the vanity lamp.
(Refer to "Vanity Lamp" in BE group)
|
14. |
Remove the hands free mic.
(Refer to "Hands Free Mic" in BE group)
|
15. |
Remove roof trim wiring harness (A) from the roof trim (B).
|
16. |
Install in the reverse order of removal.
|
Description
Power tailgate is an electro-mechanical system designed to provide power
opening and closing of the tailgate through the push of a button of a remote
key (fob), console switch, inner switch o ...
Cylinder Head Reassembly
Thoroughly clean all parts to be assembled.
Before installing the parts, apply fresh engine oil to all sliding and
...
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the top
surface of the cylinder block.
2.
Cl ...