1. |
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
|
2. |
Disconnect the nozzle hose (B).
|
3. |
Detach the clips, then remove the cowl top cover (A).
|
4. |
Install in the reverse order of removal.
|
Installation
1.
Combustion seal
2.
Rubber washer
3.
Support disc
4.
O-ring
...
Rear Assist Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear assist arm for deformation.
...
Specification
Item
Specification
Rated Voltage
DC 12.0V
Operating voltage
DC 10.7 ~ 15V
Operating temperature
-30 ~ 75°C (-22 ~ 167°F)
...