1. |
Inspect the alignment of the movable glass (C) that is between
the front (A) and rear (B) glass and if needed adjust it.
|
2. |
Adjust the height of the glass by slighty loosening the screws
(A).
|
1. |
Use the panorama sunroof emergency operation only when you have
to open or close the sunroof when there is a problem with the engine.
|
2. |
Use a hexagon wrench to open or close the panorama sunroof after
removing the roof trim. Do not apply too much force when opening or
closing the panorama sunroof.
[Movable Glass Motor ]
[Roller Blind Motor ]
|
3. |
If needed reset the panorama sunroof according to the reset method.
|
Component Location (1)
1. Buzzer
2. Console S/W
3. RKE
4. Anti Pinch Strip
5. Spindle Drive
6. Tailgate Trim Switch
7. Power Latch
8. PTG Control Module
9. Anti Pinch Strip
10. Body ...
Circuit Diagram
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Spe ...