1. |
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the accelerator position sensor connector (A).
|
3. |
Remove the installation nuts (C), the bolt (B) and then remove
the accelerator pedal module.
|
Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Intake Manifold Components
1. Intake manifold assembly
2. Electronic throttle body
3. Intake manifold stay
4. Intake manifold gasket
...
Component Location (1)
1. Smart key unit
2. Interior antenna 3
3. Interior antenna 2
4. Interior antenna 1
5. Buzzer
...