Kia Sorento: 4WD ECU Circuit Diagram and Connector
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / 4 Wheel Drive (4WD) System / 4WD Control System / 4WD ECU Circuit Diagram and Connector
| 4WD ECU Connector |
| Pin |
Function |
| 1 |
MOTOR A |
| 2 |
MOTOR B |
| 3 |
LOCK MODE SWITCH (Input) |
| 4 |
- |
| 5 |
PRESSURE SENSOR SIGNAL (Input) |
| 6 |
- |
| 7 |
CAN communication line (Low) |
| 8 |
CAN communication line (High) |
| 9 |
- |
| 10 |
- |
| 11 |
- |
| 12 |
IG. POWER (Input) |
| 13 |
GROUND |
| 14 |
BATTERY (Input) |
| 15 |
PRESSURE SENSOR GROUND (-) |
| 16 |
PRESSURE SENSOR SUPPLY (+) |
| 17 |
- |
| 18 |
- |
See also:
Seat Belt Buckle Switch (BS) Components
...
Trailing Arm Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Rear Air Conditioner Unit Components
1. Rear Heater Case (LH)
2. Rear Heater Case (RH)
3. Lower Case
4. Drain Hose
5. Rear Evaporator Core
6. Refrigerant Line
7. Flange Lining
8. O-Ring
9. Rear ...
Copyright В© www.ksmanual.com 2014-2024