Kia Sorento: Temperature Control Actuator Inspection
| Inspection |
| 1. |
IG OFF.
|
| 2. |
Disconnect the temperature control actuator connector.
(Refer to Temperature Control Actuator - "Removal and
Installation")
|
| 3. |
Apply voltage to the temperature control actuator 3 terminal and ground the 7 terminal to check whether the
actuator operates.
|
| 4. |
When connecting in the opposite, check if it operates in reverse.
[Driver's side]
[Passenger's side]
|
| 5. |
Connect the temperature control actuator connector.
|
| 6. |
IG ON.
|
| 7. |
Measure the voltage of the 4 - 5 terminal.
* Feedback the current position of the actuator to the control.
|
| 8. |
If the measured voltage does not match with the specifications, replace it with a new temperature control
actuator.
|
Temperature Control Actuator Removal and Installation
Mode Control Actuator Description and Operation
See also:
Automatic heating and air conditioning (A/C) operation. Manual heating and air conditioning (A/C) operation
Automatic heating and air conditioning (A/C) operation
Press the icon.
The modes, fan speeds, air intake, and air-conditioning are controlled automatically by setting the
...
Engine Control Module (ECM) Adjustment
Adjustment
...
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
