1. |
After replacing the TMU unit, access Dealer Engineering Mode in
head unit.
(Refer to MTS system - "TMU Dealer Engineering Mode")
|
2. |
Check the TMU version ("App S/W") from the head unit screen.
[Audio type]
[AVN type]
|
3. |
Check the H/U Type from the head unit screen.
[Audio type]
[AVN type]
|
4. |
Check the Model from the head unit screen.
[Audio type]
[AVN type]
|
35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R Clutch.
...
Cooling Fan Description
Control the cooling motor voltage in according to the duty(300Hz) of ECM.
[ECU → PWM Input Signal(SI : 300Hz)]
Signal Input Duty (%)
Motor Voltage (V)
10
...
Balance Shaft & Oil Pump Installation
BSM(Balance Shaft Module) Chain System
1.
The key of crankshaft should be aligned with the mating face of main
bearing cap. As a result of this, the piston of No.1 cylinde ...