Kia Sorento: Technical data
-
System voltage: DC 12 V
-
Working voltage: DC 10–12 V
-
Amperage rating: max. 15 A
-
Suitable temperatures: -22 to 158 °F (-30 to 70 °C)
-
Max. working pressure: 90 psi (6.2 bar)
Sealant and spare parts can be obtained and replaced at an authorized vehicle or tire dealer. Empty sealant bottles may be disposed of at home. Liquid residue from the sealant should be disposed of by your vehicle or tire dealer or in accordance with local waste disposal regulations.
Checking the tire inflation pressure
After driving briefly so as to distribute the sealant in the tire, check the inflation pressure.
After driving approximately 4–6 miles (7–10 km or about 10 minutes), stop ...
Towing. Towing without wheel dollies when using a towing service
Towing service
If emergency towing is necessary for your Kia Sorento, have your vehicle towed by an authorized Kia dealer or a commercial towing service.
Proper lifting and towing procedures are nec ...
See also:
Front Lower Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for bending or breakage.
3.
Check the ...
Head Lamps Component (2)
1. Head lamp assembly
2. Head lamp high beam bulb
3. Head lamp low beam bulb (HID & ignitor)
4. Dust cap
5. Turn signal lamp socket & bulb
...
Component Location
1. Radiator(Automatic transaxle oil cooler)
2. Mounting insulator
3. Valve body cover
4. ATF hose&pipe
5. Automatic transaxle
6. Radiator(Automatic transaxle oil c ...