Kia Sorento: Tailgate Assembly Repair Procedures - Tailgate - Body (Interior and Exterior)Kia Sorento: Tailgate Assembly Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Tailgate / Tailgate Assembly Repair Procedures

Removal
Caution
The procedure below requires at least two people.
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the tailgate trim.
(Refer to Tailgate - "Tailgate Trim")
3.
Disconnect connectors and wiring (A).

Body (Interior and Exterior) — Tailgate / Tailgate Assembly / Repair Procedures / Removal illustration

4.
Remove the clip (B) and remove the power tailgate drive unit (A).

Body (Interior and Exterior) — Tailgate / Tailgate Assembly / Repair Procedures / Removal illustration

5.
Remove the tailgate assembly (A) after removing the bolts.

Tightening torque :
21.6 - 26.5 N·m (2.2 - 2.7 kgf·m, 15.9 - 19.5 lb·ft)

Body (Interior and Exterior) — Tailgate / Tailgate Assembly / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
Components and Components Location. Adjustment
Components and Components Location Component and Component Location Tailgate 1. Tailgate Weatherstrip2. Tailgate upp...
Tailgate Trim Repair Procedures
Removal Tailgate Upper Trim 1. Remove the tailgate upper trim (A). ...
See also:

Specification
Item Specification Coil resistance (Ω) 30.0 ~ 35.0 [20 ...

Integrated Thermal Management Module (ITM) Components and Components Location. Integrated Thermal Management Module (ITM) Description and Operation
Integrated Thermal Management Module (ITM) Components and Components Location Components 1. Integrated thermal management module (ITM)2. W ...

Front Hub / Knuckle / Tone Wheel Components
1. Knuckle 2. Dust cover 3. Hub assembly 4. Brake disc ...

Copyright © www.ksmanual.com 2014-2026 - 0.0612