Kia Sorento: Supplemental Restraint System (SRS) careThe advanced Supplemental Restraint System (SRS) integrated into your Kia Sorento is engineered to be virtually maintenance-free under normal operating conditions, meaning there are no internal mechanical or electronic components that owners can safely service or adjust independently.
The Supplemental Restraint System (SRS) of your Kia Sorento is engineered to be virtually maintenance-free, so there are no serviceable parts that require owner intervention or independent mechanical adjustments.
If the dashboard SRS airbag warning light fails to illuminate during the initial ignition check sequence, or if it remains continuously illuminated while driving, you should have your vehicle inspected immediately by an authorized Kia dealership.
Any technical intervention involving the SRS—such as removing, installing, repairing, or working near the steering wheel hub, the front passenger panel, front seat assemblies, and roof rail curtain modules—must be performed exclusively by certified technicians at an authorized Kia dealership. Improper handling or unauthorized tampering with delicate SRS wiring and explosive actuators can result in severe personal injury.
When cleaning the airbag pad covers throughout the cabin of your Kia Sorento, use only a soft, dry microfiber cloth or one lightly moistened with plain water. Chemical solvents, aggressive household cleaners, or petroleum-based wipes can degrade the polymer cover materials and compromise proper airbag deployment performance during an accident.
If you ever need to dispose of individual airbag system components or prepare your Kia Sorento for permanent scrapping, strict safety precautions must be followed. An authorized Kia dealer possesses the mandatory training and safety protocols to handle these components safely. Failure to adhere to these procedures significantly increases the risk of bodily harm.
WARNING
Tampering with SRS
Never tamper with, modify, splice, or disconnect SRS wiring harnesses or any internal components of the Supplemental Restraint System. Unauthorized modifications can trigger accidental airbag inflation or permanently render the entire safety restraint system inoperative.
WARNING
Towing vehicle
Always ensure the ignition switch is turned completely off and wait at least 3 minutes before your Kia Sorento is towed. The sensitive onboard gyroscopic rollover sensors can mistakenly interpret the tilting motion during towing as a rollover event, potentially causing the side and curtain airbags to deploy unexpectedly.
Additional safety precautionsEngine Cover Removal and Installation
1.
Remove the engine cover (A).
2.
Install in the reverse order of removal.
...
Cooling Fan Circuit Diagram
...
Windshield Wiper-Washer Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after loosening
3 screws.
...