Kia Sorento: Steering Column Shroud Panel Repair Procedures - Crash Pad - Body (Interior and Exterior)Kia Sorento: Steering Column Shroud Panel Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Crash Pad / Steering Column Shroud Panel Repair Procedures

Removal
Steering Column Shroud Lower Panel
1.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
2.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
3.
Separate the steering column shroud upper panel (A).

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

4.
Remove the steering column shroud lower panel (A) after removing the screws.

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Information
Clip position :

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

5.
Disconnect the Steering Column Module (SCM) switch connector (A).

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Steering Column Shroud Upper Panel
1.
Remove the crash pad center garnish [RH].
(Refer to Crash Pad - "Crash Pad Garnish")
2.
Remove the steering column shroud upper panel (A) using the service hole.

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Information
Clip position :

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Information
Clip position :

Body (Interior and Exterior) — Crash Pad / Steering Column Shroud Panel / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
Crash Pad Lower Panel Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the crash pad side cover [D...
Crash Pad Garnish Repair Procedures
Removal Crash Pad Center Garnish [Driver's side] 1. Remove the crash pad side cover [Driver's side]. (Refer to Crash Pad - "Cra...
See also:

Blind Spot Detection Switch Installation
1. Install the crash pad side switch assembly after connecting the connector. 2. Install the crash pad lower panel. ...

Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect occupants in certain side impacts and to help prevent them from e ...

Refrigeration Cycle
...

Copyright © www.ksmanual.com 2014-2026 - 0.0644