Kia Sorento: Speed Sensor Specifications. Speed Sensor Components and Components Location
| Specification |
|
Item |
Specification |
|
Type |
Hall effect sensor |
|
Operating condition (°C [°F]) |
(-40 to 150 [-40 to 302]) |
|
Voltage (V) |
MAX 9 |
| Output signal (mA) |
High : 11.8 - 16.8 |
|
Low : 5.9 - 8.4 |
| Component |
| 1. ATF Warmer Hose 2. Valve Body Cover 2-a. 11.8 - 13.7 N·m (1.2 - 1.4 kgf·m, 8.7 - 10.1 lb·ft) 3. Valve Body Cover Gasket 4. E Module 4-a. 9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft) |
5. Valve Body 5-a. 9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft) 6. Speed Sensor 6-a. 9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft) |
Armrest. Seatback pocket : (if equipped)
Armrest
Figure 1. 7 passenger vehicle
...
Air Cleaner Removal and Installation
1.
Remove the engine cover.
2.
Remove the air duct (A).
3.
Remove the battery.
(Refer to Engi ...
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...