Kia Sorento: Speed Sensor Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Speed Sensor Installation

Installation

•	When installing the valve body, make sure that the pin (B) of the manual valve is inserted into the detent lever (A).

•	The existing valve body cover gasket (A) must be replaced with a new one (do not reuse).

1.	Install in the reverse order of removal.

2.	Refill the automatic transaxle with fluid. (Refer to Hydraulic System - "Fluid")

3.	Refill the engine coolant. (Refer to Engine Mechanical System - "Coolant")

4.	After installing, check for leakage of fluid from hose connection during engine starting and running.

Speed Sensor Removal

Removal ...

Transaxle Control Module (TCM) Description and Operation

Description The module receives and processes signals from various sensors and implements a wide range of transaxle controls to ensure optimal driving conditions for the driver. Fun...

See also:

Removal
In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

Closing the tailgate
To close the tailgate, lower and push down the tailgate firmly. Make sure that the tailgate is securely latched. WARNING Make sure your hands, feet and other parts of your body are safely out of ...

Smart Key Diagnostic Inspection
Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The following thr ...

Manuals list

Copyright © www.ksmanual.com 2014-2026 - 0.0665