Kia Sorento: Specifications - Keyless Entry And Burglar Alarm - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Specifications

Item
Specification
Rated voltage
DC 3V
Temperature range
-4°F ~ 140°F (-20°C ~ +60°C)
RF Modulation method
FSK
LF Modulation method
ASK
Keyless entry transmitterPower source
Lithium 3V battery (1EA)
Transmissible distance
30m or more
Life of battery
2 years or more (at 20 times per day)
Button
4 (Door lock, Door unlock, Tailgate, Panic)
Transmission frequency
315 MHz

※ FSK : Frequency Shift Keying
ASK : Amplitude Shift Keying
Keyless Entry And Burglar Alarm
...

Component Location
1. Hood switch 2. Burglar horn 3. IPM & RF receiver 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear door lock actuator ...

See also:

Output Speed Sensor Removal
1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

Antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof trim") 2. Disconnect the power cable (A). 3. ...

Auto Defogging Actuator Description
The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives ...

Copyright © www.ksmanual.com 2014-2024