Kia Sorento: Specification. Description and Operation
Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Auto Lighting Control System / Specification. Description and Operation
Specification
| Specification |
| Item |
Specifications |
|
| Rated voltage (V) |
DC 5 |
|
| Illuminations (Lux) |
100 (V) |
0.59 - 0.93 |
|
200 (V) |
1.0 - 1.6 |
|
Description and Operation
| Description |
| • |
This system uses an illumination sensor to automatically turn ON the tail lamp and head lamp based on the
ambient light change in surrounding environment's.
|
| • |
It activates when the vehicle enters/exits tunnel, or when the illumination condition in surrounding
environment changes due to rain, snow, or fog.
|
Auto Lighting Control System
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the crash pad center speake...
Auto Light Sensor Repair Procedures
See also:
Pressure type Side Impact Sensor (P-SIS) On Vehicle Inspection
On Vehicle Inspection
Diagnostic with KDS
1.
The side impact sensor can be more quickly diagnosed for p ...
Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two Front-SIS which are installed
at each center of the front door module (LH and RH) and two Rear-SIS which are
installed at each rear pillar near ...
Rear Coil Spring Inspection
1.
Check the spring for distortion, aging or damage.
2.
Check the spring upper pad and lower pad for aging or damage.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0629