Kia Sorento: Specification - Heated Oxygen Sensor (HO2S) - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2022 Service ManualKia Sorento: Specification

Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) / Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
Output Voltage(V)
RICH
Approx. 0.9
LEAN
Approx. 0.04

Item
Specification
Heater Resistance (Ω)
3.3 ~ 4.1Ω[21°C(69.8°F)]

Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance ...

Circuit Diagram
...

See also:

Emergency starting
Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle ...

Troubleshooting
Vehicle inspection SYMPTOM CHART Symptom Suspect Area Remedy (See page) Squeak or grunt-noise from the front suspension, occurs more in cold ambient t ...

To install a child restraint system using lower and tether anchorages
WARNING Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. Shake the ...

Copyright © www.ksmanual.com 2014-2022