Kia Sorento: Speaker Repair Procedures
| Inspection |
| 1. |
Remove the screws to rule out the interference from the body trims and surrounding parts and then remove
the speaker.
|
| 2. |
After removing the speaker, check the sound quality of the speaker with the connector plugged in.
|
| 1. |
Abnormal vibration
|
| 2. |
Noise
|
| 3. |
malfunctions
|
| Removal |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the center speaker grille (A).
|
| 3. |
Disconnect the auto light sensor connector (A).
|
| 4. |
Remove the center speaker (A) after removing the screws.
|
| 5. |
Disconnect the center speaker connector (A).
|
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the front midrange speaker grille (A)
|
| 3. |
Remove the front midrange speaker (A) after removing the screws.
|
| 4. |
Disconnect the front midrange speaker connector (A).
|
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the front pillar trim.
(Refer to Body - "Front Pillar Trim")
|
| 3. |
Remove the tweeter speaker bracket (A) by pushing the holder in the direction of arrow.
|
| 4. |
Remove the tweeter speaker (A) by pushing the holder in the direction of arrow.
|
| 1. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 2. |
Disconnect the front door speaker connector (A).
|
| 3. |
Remove the front door speaker (A) after removing the bolts.
|
| 1. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
| 2. |
Disconnect the rear door speaker connector (A).
|
| 3. |
Remove the rear door speaker (A) after removing the bolts.
|
| 1. |
Remove the tailgate pillar trim.
(Refer to Body - "Tailgate Pillar Trim")
|
| 2. |
Disconnect the rear tweeter speaker connector (A).
|
| 3. |
Remove the rear tweeter speaker (A) after removing the screws.
|
| 1. |
Remove the luggage side trim [LH].
(Refer to Body - "Luggage Side Trim")
|
| 2. |
Disconnect the subwoofer speaker connector (A).
|
| 3. |
Remove the subwoofer speaker (A) after removing the nuts.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Engine Coolant temperature sensor (ECTS) Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
...
Oil Pump Component Location
1. Automatic transaxle
2. Oil pump assembly
...
Lane Keeping Assist (LKA)
When you drive your Kia Sorento over a certain speed, Lane Keeping Assist can detect lane markings or road edges.
Lane Keeping Assist may assist with steering to prevent the vehicle from leaving ...