Item |
Specification |
Type |
FXU16HR11 |
Gap |
1.0 ~1.1 mm (0.0394 ~ 0.0433 in.) |
Seat Heater Inspection
Front seat
1.
Operate the seat warmer after connecting the connector, and then
check the thermostat by measuring the temperature of seat surface.
...
Cylinder Head Inspection
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and feeler gauge, measure the surface
the contacting the cylinder block and the manifolds fo ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...