Kia Sorento: Receiver-Drier Removal and Installation. A/C Pressure Transducer Description and Operation
Kia Sorento (MQ4, 2021-2026) Service Manual / Heating,Ventilation And Air Conditioning / Air Conditioning System / Receiver-Drier Removal and Installation. A/C Pressure Transducer Description and Operation
Receiver-Drier Removal and Installation
| Removal |
| 1. |
Remove the condenser.
(Refer to Air Conditioning System - "Condenser")
|
| 2. |
Remove the receiver drier cap (A).
|
| 3. |
Remove the receiver drier filter (A) and O-ring (B).
|
| 4. |
Remove the desiccant (A) in the receiver drier.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
A/C Pressure Transducer Description and Operation
| Description |
Measure the pressure of the refrigerant line and convert it into a voltage value. It optimizes and protects the air
conditioning system by controlling the operation of the compressor using the converted voltage value.
Removal
...
Condenser Removal and Installation
Removal
1.
Recover refrigerant by using the refrigerant recovery/recycling/charging machine.
(Refer to Air conditioning System - "Refriger...
A/C Pressure Transducer Removal and Installation
See also:
Acceleration type Side Impact Sensor (A-SIS) On Vehicle Inspection
On Vehicle Inspection
Diagnostic with KDS
1.
The side impact sensor can be more quickly diagnosed for p ...
User Settings Mode
Description
On this mode, you can change setting of the doors, lamps, and so on.
Door
Auto Door Lock (if equipped)
...
Height Adjust Removal and Installation
Removal
1.
Remove the center pillar upper trim.
(Refer to Body - "Center Pillar Trim")
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0511