Kia Sorento: Rear Door Window Glass Repair Procedures

Removal

1.	Remove the rear door trim. (Refer Rear Door - "Rear Door Trim")

2.	Remove the rear door belt inside and outside weatherstrip. (Refer to Door (Rear) - "Rear Door Weatherstrip")

3.	Remove the delta inner cover screws (A).

4.	Separate the rear door glass run (A).

5.	Remove the rear door front garnish (A) after removing the screw.

Loosen the rear door channel bolts (A) and nut (B).

Tightening torque

Bolt : 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Nut : 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb·ft, 34.7 - 52.1 lb·in)

Body (Interior and Exterior) — Door (Rear) / Rear Door Window Glass / Repair Procedures / Removal illustration

7.	Remove the rear door window glass hole plug (A).

8.	Lower the glass by operating the power window switch until the glass mounting bolt is exposed in the plug hole.

Remove the rear door window glass (A) after removing the bolt.

Tightening torque :

5.9 - 8.8 N·m (0.6 - 0.9 kgf·m, 4.3 - 6.5 lb·ft)

Body (Interior and Exterior) — Door (Rear) / Rear Door Window Glass / Repair Procedures / Removal illustration

Installation

1.	Install in the reverse order of removal.

Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the rear door delta inner c...

Removal 1. Remove the rear door window glass. (Refer to Door (Rear) - "Rear Door Window Glass") ...

Manuals list