Kia Sorento: Rear Door Module Repair Procedures

Removal

1.	Remove the rear door window glass. (Refer to Door (Rear) - "Rear Door Window Glass")

2.	Remove the rear door outside handle. (Refer to Door (Rear) - "Rear Door Outside Handle")

3.	Remove the rear door speaker. (Refer to Body Electrical System - "Speaker")

4.	Remove the rear door power window motor. (Refer to Body Electrical System - "Power Window Motor")

5.	Remove the rear door outside handle base screw (A).

Remove the rear door latch screws (A).

Tightening torque :

6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8 lb·ft)

Body (Interior and Exterior) — Door (Rear) / Rear Door Module / Repair Procedures / Removal illustration

7.	Disconnect the rear door main wiring connector (A).

Remove the rear door module (A) after removing the bolts.

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Body (Interior and Exterior) — Door (Rear) / Rear Door Module / Repair Procedures / Removal illustration

Remove the rear door main wiring connector clip (A).

Body (Interior and Exterior) — Door (Rear) / Rear Door Module / Repair Procedures / Removal illustration

Clip position :

Body (Interior and Exterior) — Door (Rear) / Rear Door Module / Repair Procedures / Removal illustration

Installation

1.	Install in the reverse order of removal.

Removal 1. Remove the rear door window glass. (Refer to Door (Rear) - "Rear Door Window Glass") ...

Rear Door Curtain Assembly Repair Procedures Removal 1. Remove the rear door trim. (Refer Rear Door - "Rear Door Trim&qu...

Manuals list