Kia Sorento: Purge Control Solenoid Valve (PCSV) Removal and Installation
Kia Sorento (MQ4, 2021-2026) Service Manual / Emission Control System / Evaporative Emission Control System / Purge Control Solenoid Valve (PCSV) Removal and Installation
| Removal |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Disconnect the purge control solenoid valve connector (A).
|
| 3. |
Disconnect the vapor hoses (B) from the Purge Control Solenoid Valve (PCSV).
|
| 4. |
Remove the bracket installation bolt (C), and then remove the valve.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Description
•
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the
can...
Purge Control Solenoid Valve (PCSV) Description and Operation
Exhaust Emission Control System
See also:
Smart key precautions
The smart key will not work if any of the following occur: The smart key
is close to a radio transmitter such as a radio station or an airport which
can interfere with normal operation of the s ...
Rear Driveshaft Reassembly
1.
Wrap tape around the driveshaft splines (TJ side ) to prevent
damage to the boots.
2.
Apply grease to the driveshaft and install the boo ...
Antenna Coil Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A).
3.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0501