Kia Sorento: Pressure Sensor Repair procedures
Kia Sorento (MQ4, 2021-2026) Service Manual / All Wheel Drive (AWD) System / Coupling Assembly / Pressure Sensor Repair procedures
| Inspection |
If you have trouble code related to the pressure sensor check pressure sensor according to the inspection
process.
|
Pressure Sensor Inspection Procedure
Measure the resistance of pressure sensor
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the pressure sensor connector.
|
| 3. |
Measure resistance between sensor terminal and terminal.
|
| 4. |
Check the measured resistance. (Refer to table)
|
| Removal |
| 1. |
Remove the coupling assembly.
(Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator
Coupling")
|
| 2. |
Remove the pressure sensor (A).
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
Description
The AWD ECU makes a Motor Pump (Actuator) turn round for generating an oil pressure. And then it presses a multiple
disk clutch and transfers the generated torque into rear...
Pressure Sensor Description and Operation
Driveshaft and axle
See also:
Power Door Lock Switch Installation
Driver Power Window Main Switch
1.
Install the driver power window switch assembly and connectors.
2.
Install the front door trim.
...
Small pocket (for 6 passenger vehicle)
6-passenger models feature a compact utility pocket built directly into the side of the 2nd-row seat cushion,
offering handy storage for small items like phones, keys, or media players.
...
Auto Head lamp leveling Unit Removal
Height Sensor & Unit
1.
Disconnect the negative(-) battery terminal.
2.
Remove the height sensor connector (A).
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0613