Kia Sorento: Power Tailgate Unit Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Power Tailgate Unit Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Unit Installation

1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) battery terminal.
Power Tailgate Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear left luggage side trim. (Refer to Body - "Interior Trim") ...

Power Tailgate Latch Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate trim (A). (Refer ...

See also:

Propeller Shaft Removal and Installation
1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...

Description
Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an ...

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Copyright www.ksmanual.com 2014-2026