Kia Sorento: Positive Crankcase Ventilation (PCV) Valve Installation - Crankcase Emission Control System - Emission Control System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Positive Crankcase Ventilation (PCV) Valve Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Installation

1.
Install in the reverse order of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.    ...

Evaporative Emission Control System
...

See also:

Rear Assist Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Compressor Oil Specification
1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. ...

Seat Heater Switch Inspection
Front Seat Heater Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to Body - &q ...

Copyright В© www.ksmanual.com 2014-2024