Kia Sorento: Outside Rear View Mirror Disassembly and Reassembly

Special Service Tool

Tool Name / Number	Illustration	Description
Outside Rear View Mirror Glass Remover Tool 0K876 - L2100		Used when removing outside rear view mirror glass
Outside View Mirror Assembly Fixing Stand 0K876 - C5100		Used when fixing the outside rear view mirror assembly

Disassembly

•	When disassembling the outside rear view mirror, use of special tools can improve workability and safety against damage to parts.

•	The parts where can be worked in assembled state such as scalp or others, proceed with the work on vehicle.

•	The use of special tool is as below.

Outside View Mirror Assembly Fixing Stand (0K876 - C5100)

1)	Mount the special tool bolt (B) to the outside rear view mirror assembly (A) and tighten the bolt fixing nut (C) to fix it so that it does not move.

2)	Turn the handle (B) to set the outside rear view mirror assembly (A) to position where is easy to work.

Outside Rear View Mirror Glass Remover Tool (0K876 - L2100)

1)	Remove the mirror (A) by applying slight force, after inserting the special tools as shown below.

Mirror

1.	After inserting the special tools as shown in the illustration below, remove the mirror (A) by applying slight force.

2.	Disconnect the mirror heated wire connector (A) and the BCW & RCCW indicator connector (B).

Housing

1.	Remove the mirror.

2.	Remove the housing cover (A) after removing screws.

Scalp

1.	Remove the mirror.

Remove the scalp (A).

Body (Interior and Exterior) — Mirror / Outside Rear View Mirror / Disassembly and Reassembly / Disassembly illustration

Clip position :

Body (Interior and Exterior) — Mirror / Outside Rear View Mirror / Disassembly and Reassembly / Disassembly illustration

Outside Mirror Actuator

1.	Remove the mirror.

2.	Remove the mirror actuator (A) after removing the screw.

3.	Disconnect the mirror actuator connector (A).

Reassembly

1.	Reassemble in the reverse order of disassembly.

Removal 1. Remove the front door trim. (Refer to Door (Front) - "Front Door Trim") 2. ...

Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the multi-sensor blanking c...

Manuals list