Kia Sorento: Oil Pressure & Oil Temperature Sensor (OPTS) Removal and Installation

Removal

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")

3.	Disconnect the Oil Pressure & Temperature Sensor (OPTS) connector (A).

Remove the OPTS (A).

Tightening torque :

35.3 - 38.2 N·m (3.6 - 3.9 kgf·m, 26.0 - 28.2 lb·ft)

Engine Control / Fuel System — Engine Control System / Oil Pressure & Oil Temperature Sensor (OPTS) / Removal and Installation / Removal illustration

Installation

Install in the reverse order of removal.

•	Install the Oil Pressure & Temperature Sensor (OPTS) to the specified torque

•	If the OPTS is dropped, it may cause internal damage. (Do not reuse)

•	Be careful not to let engine oil and/or coolant flow into the OPTS connector.

•	When engine oil and/or coolant flow into the OPTS connector, replace it with a new one. (Do not reuse)

On Vehicle Inspection 1. The engine control system can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide") ...

Variable Force Solenoid (VFS) Specifications Specification Item Specification Coil resistance (...

Manuals list