Kia Sorento: Oil Level Sensor Removal and Installation - Lubrication System - Engine Mechanical SystemKia Sorento: Oil Level Sensor Removal and Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Lubrication System / Oil Level Sensor Removal and Installation

Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Drain the engine oil.
(Refer to Lubrication System - “Engine Oil”)
3.
Remove the oil drain survice cover (A).

Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m , 5.8 - 8.7 lb·ft)

Engine Mechanical System — Lubrication System / Oil Level Sensor / Removal and Installation / Removal illustration

4.
Disconnect the oil level sensor connector (A).

Engine Mechanical System — Lubrication System / Oil Level Sensor / Removal and Installation / Removal illustration

5.
Remove the oil level sensor (A).

Tightening torque :
8.8 - 9.8 N·m (0.9 - 1.0 kgf·m, 6.5 - 7.2 lb·ft)

Engine Mechanical System — Lubrication System / Oil Level Sensor / Removal and Installation / Removal illustration

Installation
1.
Install in the reverse order of removal
2.
Fill engine oil.
(Refer to Lubrication System - "Engine Oil")
Oil Pressure Control Solenoid Valve Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") ...
Timing System
...
See also:

Components and Components Location. Roof Side Molding Repair Procedures
Components and Components Location Component and Component Location Body Side Molding 1. Front Mud Guard2. Rear Mud ...

Child Restraint System (CRS)
Infants and young children must always be secured in an appropriate rear-facing or forward-facing Child Restraint System that has been properly anchored to the rear seat cushion of your Kia Soren ...

Front Washer Motor Removal
   - When servicing the washer pump, be careful not to damage the washer pump seal. ...

Copyright © www.ksmanual.com 2014-2026 - 0.0628